View F339X141033MIP2W0_9012882.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

f339x1 330vac www.vishay.com vishay bccomponents revision: 30-jun-15 1 document number: 28185 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 interference suppression film capacitor - class x1 radial mkp 330 v ac - standard across the line features ? 7.5 mm to 27.5 mm lead pitch ? small dimensions ? high voltage capability ? material categorization: ? for definitions of compliance please see www.vishay.com/doc?99912 applications for standard across th e line x1 applications ? see also application note: www.vishay.com/doc?28153 note ?for more detailed data and test requirements, contact rfi@vishay.com note ?? d t 10 % of standard diameter specified quick reference data capacitance range (e12 series) 0.001 f to 2. 2 f (preferred values according to e6) capacitance tole rance 20 %; 10 %; ( 5 % on request) climatic testing class accord ing to iec 60068-1 55/110/56/b rated ac voltage 330 v ac ; 50 hz to 60 hz permissible dc voltage 800 v dc at 85 c maximum applicatio n temperature 110 c reference standards iec 60384-14 and en 60384-14 iec 60065 requires pass . flamm. class b csa-e384-14; ul 60384-14 cqc dielectric polypropylene film electrodes metallized construction mono construction encapsulation plastic case, epoxy resin sealed, flame retardant ul-class 94 v-0 leads tinned wire marking c-value; tolerance; rated voltage; sub-class; manufacturers type; code for dielectric material; manufacturer location, year and week; manufacturer's logo or name; safety approvals dimensions in millimeters w ? d t l p h l t
f339x1 330vac www.vishay.com vishay bccomponents revision: 30-jun-15 2 document number: 28185 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 composition of catalog number notes ? for detailed tape specifications refer to packaging information www.vishay.com/doc?28139 (1) packaging will be bulk for all capacitors with pitch ? 15 mm and such with long leads (> 5 mm). ? capacitors with short lead s up to 5 mm and pitch > 15 mm will be in tray and asking code will be t. 0.1 2 13 10 4 100 5 1000 6 10 000 7 22 pin s (#) cu s tomized 0 = s tandard other = s pecial 33 = 330 v ac 1 2 3 4 5 6 7 8 9 10 11 12 1 3 14 15 16 17 f 3 3 9 x 1 4 1 0 3 3 mf m 2b0 20 % 10 % 5 % m k j a s pecial tolerance b/t bulk/loo s e (1) not for bent back w tape and reel (h: 18.5 mm; 500 mm) pitch 22.5 mm 3.5 + 1, - 0.5 a 7.5 and 10 3.5 0.3 p 15 5 1 m all 25 2 i all 0: s pace holder multiplier (nf) 7.5 c 10 d 15 f 22.5 i 27.5 k p 1 (mm) pitch code code example: 310 10 nf 0.01 f 410 100 nf 0.1 f 510 1000 nf 1.0 f voltage cla ss type s pecial code for terminal s pecial tolerance packing code packing s tyle remark l t (mm) lead length code pitch (mm)
f339x1 330vac www.vishay.com vishay bccomponents revision: 30-jun-15 3 document number: 28185 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) see voltage proof test for metalized film capacitors: www.vishay.com/doc?28169 specific reference data description value rated ac voltage (u rac ) 330 v permissible dc voltage (u rdc ) 800 v tangent of loss angle at 1 khz at 10 khz c < 100 nf ? 10 x 10 -4 ? 20 x 10 -4 470 nf ? c ? 2.2 f ? 20 x 10 -4 ? 70 x 10 -4 rated voltage pulse slope (du/dt) r at 465 v dc 100 v/s r between leads, for c ? 0.33 f at 100 v; 1 min > 15 000 m ? rc between leads, for c > 0.33 f at 100 v; 1 min > 5000 s r between leads and case; 100 v; 1 min > 30 000 m ? withstanding (dc) voltag e (cut off current 10 ma) (1) ; rise time ? 1000 v/s: c ? 2.2 f 3400 v; 1 min c > 2.2 f 2200 v; 1 min withstanding (ac) voltage between leads and case 2160 v; 1 min maximum applicatio n temperature 110 c electrical data and ordering information u rac (v) cap. (f) dimensions w x h x l (mm) mass (g) (3) catalo g number f339x1... and packa g in g loose in box taped reel short leads lon g leads l t = 3.5 mm + 1 mm/- 0.5 mm ( ? 10 mm) or 3.5 mm 0.3 mm ( ? 15 mm) l t = 5.0 mm 1.0 mm spq l t = 25.0 mm 2.0 mm spq ? = 500 mm (1)(2) h = 18.5 mm; p 0 = 12.7 mm spq 330 pitch = 7.5 mm 0.4 mm; d t = 0.50 mm 0.05 mm; c-tol. = 20 % 0.0010 4.0 x 9.0 x 10.0 0.4 21033mca2b0 21033mcm2b0 1500 21033mci2b0 1000 21033mc02w0 2500 0.0015 21533mca2b0 21533mcm2b0 21533mci2b0 21533mc02w0 0.0022 22233mca2b0 22233mcm2b0 22233mci2b0 22233mc02w0 0.0033 5.0 x 10.5 x 10.0 0.4 23333mca2b0 23333mcm2b0 1000 23333mci2b0 1250 23333mc02w0 2000 0.0047 6.0 x 11.5 x 10.0 0.8 24733mca2b0 24733mcm2b0 750 24733mci2b0 1000 24733mc02w0 1900 pitch = 10.0 mm 0.4 mm; d t = 0.60 mm 0.06 mm; c-tol. = 20 % 0.0010 4.0 x 10.0 x 12.5 0.6 21033mda2b0 21033mdm2b0 1000 21033mdi2b0 1250 21033md02w0 1400 0.0015 21533mda2b0 21533mdm2b0 21533mdi2b0 21533md02w0 0.0022 22233mda2b0 22233mdm2b0 22233mdi2b0 22233md02w0 0.0033 23333mda2b0 23333mdm2b0 23333mdi2b0 23333md02w0 0.0047 24733mda2b0 24733mdm2b0 24733mdi2b0 24733md02w0 0.0068 26833mda2b0 26833mdm2b0 26833mdi2b0 26833md02w0 0.010 31033mda2b0 31033mdm2b0 31033mdi2b0 31033md02w0 0.015 31533mda2b0 31533mdm2b0 31533mdi2b0 31533md02w0 0.022 5.0 x 11.0 x 12.5 0.82 32233mda2b0 32233mdm2b0 1000 32233mdi2b0 1000 32233md02w0 1100 0.033 6.0 x 12.0 x 12.5 1.1 33333mda2b0 33333mdm2b0 750 33333mdi2b0 750 33333md02w0 900 pitch = 15.0 mm 0.4 mm; d t = 0.60 mm 0.06 mm; c-tol. = 20 % 0.010 5.0 x 11.0 x 17.5 1.0 31033mfp2b0 31033mfm2b0 1250 31033mfi2b0 1000 31033mf02w0 1100 0.015 31533mfp2b0 31533mfm2b0 31533mfi2b0 31533mf02w0 0.022 32233mfp2b0 32233mfm2b0 32233mfi2b0 32233mf02w0 0.033 33333mfp2b0 33333mfm2b0 33333mfi2b0 33333mf02w0 0.047 34733mfp2b0 34733mfm2b0 34733mfi2b0 34733mf02w0 0.068 6.0 x 12.0 x 17.5 1.4 36833mfp2b0 36833mfm2b0 1000 36833mfi2b0 1000 36833mf02w0 900 pitch = 15.0 mm 0.4 mm; d t = 0.80 mm 0.08 mm; c-tol. = 20 % 0.10 7.0 x 13.5 x 17.5 1.8 41033mfp2b0 41033mfm2b0 750 41033mfi2b0 500 41033mf02w0 800 0.15 8.5 x 15.0 x 17.5 2.4 41533mfp2b0 41533mfm2b0 750 41533mfi2b0 500 41533mf02w0 650 0.22 10.0 x 16.5 x 17.5 3.0 42233mfp2b0 42233mfm2b0 500 42233mfi2b0 450 42233mf02w0 600
f339x1 330vac www.vishay.com vishay bccomponents revision: 30-jun-15 4 document number: 28185 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 330 pitch = 22.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm; c-tol. = 20 % 0.10 6.0 x 15.5 x 26.0 2.4 41033mip2t0 41033mim2t0 300 41033mii2b0 250 41033mi02w0 600 0.15 41533mip2t0 41533mim2t0 41533mii2b0 41533mi02w0 0.22 7.0 x 16.5 x 26.0 2.9 42233mip2t0 42233mim2t0 200 42233mii2b0 250 42233mi02w0 500 0.33 8.5 x 18.0 x 26.0 3.8 43333mip2t0 43333mim2t0 200 43333mii2b0 250 43333mi02w0 450 0.47 10.0 x 19.5 x 26.0 6.8 44733mip2t0 44733mim2t0 200 44733mii2b0 200 44733mi02w0 350 0.68 12.0 x 22.0 x 26.0 7.8 46833mip2t0 46833mim2t0 150 46833mii2b0 200 46833mi02w0 300 0.82 12.5 x 22.5 x 26.5 7.8 48233mip2t0 48233mim2t0 140 48233mii2b0 400 48233mi02w0 300 pitch = 27.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm; c-tol. = 20 % 0.22 9.0 x 19.0 x 31.5 5.5 42233mkp2t0 42233mkm2t0 100 42233mki2b0 150 -- 0.33 43333mkp2t0 43333mkm2t0 43333mki2b0 0.47 44733mkp2t0 44733mkm2t0 44733mki2b0 0.68 11.0 x 21.0 x 31.0 7.4 46833mkp2t0 46833mkm2t0 100 46833mki2b0 125 1.0 13.0 x 23.0 x 31.0 9.2 51033mkp2t0 51033mkm2t0 100 51033mki2b0 125 1.5 18.0 x 28.0 x 31.5 16.1 51533mkp2t0 51533mkm2t0 100 51533mki2b0 100 2.2 21.0 x 31.0 x 31.0 20.3 52233mkp2t0 52233mkm2t0 50 52233mki2b0 75 pitch = 7.5 mm 0.4 mm; d t = 0.50 mm 0.05 mm; c-tol. = 10 % 0.0010 4.0 x 9.0 x 10.0 0.4 21033kca2b0 21033kcm2b0 1500 21033kci2b0 1000 21033kc02w0 2500 0.0012 21233kca2b0 21233kcm2b0 21233kci2b0 21233kc02w0 0.0015 21533kca2b0 21533kcm2b0 21533kci2b0 21533kc02w0 0.0018 21833kca2b0 21833kcm2b0 21833kci2b0 21833kc02w0 0.0022 22233kca2b0 22233kcm2b0 22233kci2b0 22233kc02w0 0.0027 22733kca2b0 22733kcm2b0 22733kci2b0 22733kc02w0 0.0033 5.0 x 10.5 x 10.0 0.4 23333kca2b0 23333kcm2b0 1000 23333kci2b0 1250 23333kc02w0 2000 0.0039 23933kca2b0 23933kcm2b0 23933kci2b0 23933kc02w0 0.0047 6.0 x 11.5 x 10.0 0.8 24733kca2b0 24733kcm2b0 750 24733kci2b0 1000 24733kc02w0 1900 0.0056 25633kca2b0 25633kcm2b0 25633kci2b0 25633kc02w0 pitch = 10.0 mm 0.4 mm; d t = 0.60 mm 0.06 mm; c-tol. = 10 % 0.0010 4.0 x 10.0 x 12.5 0.6 21033kda2b0 21033kdm2b0 1000 21033kdi2b0 1250 21033kd02w0 1400 0.0012 21233kda2b0 21233kdm2b0 21233kdi2b0 21233kd02w0 0.0015 21533kda2b0 21533kdm2b0 21533kdi2b0 21533kd02w0 0.0018 21833kda2b0 21833kdm2b0 21833kdi2b0 21833kd02w0 0.0022 22233kda2b0 22233kdm2b0 22233kdi2b0 22233kd02w0 0.0027 22733kda2b0 22733kdm2b0 22733kdi2b0 22733kd02w0 0.0033 23333kda2b0 23333kdm2b0 23333kdi2b0 23333kd02w0 0.0039 23933kda2b0 23933kdm2b0 23933kdi2b0 23933kd02w0 0.0047 24733kda2b0 24733kdm2b0 24733kdi2b0 24733kd02w0 0.0056 25633kda2b0 25633kdm2b0 25633kdi2b0 25633kd02w0 0.0068 26833kda2b0 26833kdm2b0 26833kdi2b0 26833kd02w0 0.0082 28233kda2b0 28233kdm2b0 28233kdi2b0 28233kd02w0 0.010 31033kda2b0 31033kdm2b0 31033kdi2b0 31033kd02w0 0.012 31233kda2b0 31233kdm2b0 31233kdi2b0 31233kd02w0 0.015 31533kda2b0 31533kdm2b0 31533kdi2b0 31533kd02w0 0.018 5.0 x 11.0 x 12.5 0.82 31833kda2b0 31833kdm2b0 1000 31833kdi2b0 1000 31833kd02w0 1100 0.022 32233kda2b0 32233kdm2b0 32233kdi2b0 32233kd02w0 0.027 6.0 x 12.0 x 12.5 1.1 32733kda2b0 32733kdm2b0 750 32733kdi2b0 750 32733kd02w0 900 0.033 33333kda2b0 33333kdm2b0 33333kdi2b0 33333kd02w0 electrical data and ordering information u rac (v) cap. (f) dimensions w x h x l (mm) mass (g) (3) catalo g number f339x1... and packa g in g loose in box taped reel short leads lon g leads l t = 3.5 mm + 1 mm/- 0.5 mm ( ? 10 mm) or 3.5 mm 0.3 mm ( ? 15 mm) l t = 5.0 mm 1.0 mm spq l t = 25.0 mm 2.0 mm spq ? = 500 mm (1)(2) h = 18.5 mm; p 0 = 12.7 mm spq
f339x1 330vac www.vishay.com vishay bccomponents revision: 30-jun-15 5 document number: 28185 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? spq = standard packing quantity (1) reel diameter = 356 mm is available on request (2) h = in-tape height; p 0 = sprocket hole distance; for detailed specifications refer to packaging information (3) weight for short lead product only 330 pitch = 15.0 mm 0.4 mm; d t = 0.60 mm 0.06 mm; c-tol. = 10 % 0.010 5.0 x 11.0 x 17.5 1.0 31033kfp2b0 31033kfm2b0 1000 31033kfi2b0 1000 31033kf02w0 1100 0.012 31233kfp2b0 31233kfm2b0 31233kfi2b0 31233kf02w0 0.015 31533kfp2b0 31533kfm2b0 31533kfi2b0 31533kf02w0 0.018 31833kfp2b0 31833kfm2b0 31833kfi2b0 31833kf02w0 0.022 32233kfp2b0 32233kfm2b0 32233kfi2b0 32233kf02w0 0.027 32733kfp2b0 32733kfm2b0 32733kfi2b0 32733kf02w0 0.033 33333kfp2b0 33333kfm2b0 33333kfi2b0 33333kf02w0 0.039 33933kfp2b0 33933kfm2b0 33933kfi2b0 33933kf02w0 0.047 34733kfp2b0 34733kfm2b0 34733kfi2b0 34733kf02w0 0.056 6.0 x 12.0 x 17.5 1.4 35633kfp2b0 35633kfm2b0 1000 35633kfi2b0 1000 35633kf02w0 900 0.068 36833kfp2b0 36833kfm2b0 36833kfi2b0 36833kf02w0 pitch = 15.0 mm 0.4 mm; d t = 0.80 mm 0.08 mm; c-tol. = 10 % 0.082 7.0 x 13.5 x 17.5 1.8 38233kfp2b0 38233kfm2b0 1000 38233kfi2b0 500 38233kf02w0 800 0.100 41033kfp2b0 41033kfm2b0 41033kfi2b0 41033kf02w0 0.120 8.5 x 15.0 x 17.5 2.4 41233kfp2b0 41233kfm2b0 1000 41233kfi2b0 500 41233kf02w0 650 0.150 41533kfp2b0 41533kfm2b0 41533kfi2b0 41533kf02w0 0.180 10.0 x 16.5 x 17.5 3.0 41833kfp2b0 41833kfm2b0 500 41833kfi2b0 500 41833kf02w0 600 pitch = 22.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm; c-tol. = 10 % 0.10 6.0 x 15.5 x 26.0 2.4 41033kip2t0 41033kim2t0 300 41033kii2b0 250 41033ki02w0 600 0.12 41233kip2t0 41233kim2t0 41233kii2b0 41233ki02w0 0.15 41533kip2t0 41533kim2t0 41533kii2b0 41533ki02w0 0.18 7.0 x 16.5 x 26.0 2.9 41833kip2t0 41833kim2t0 200 41833kii2b0 250 41833ki02w0 500 0.22 42233kip2t0 42233kim2t0 42233kii2b0 42233ki02w0 0.27 8.5 x 18.0 x 26.0 3.8 42733kip2t0 42733kim2t0 200 42733kii2b0 250 42733ki02w0 450 0.33 43333kip2t0 43333kim2t0 43333kii2b0 43333ki02w0 0.39 10.0 x 19.5 x 26.0 6.8 43933kip2t0 43933kim2t0 200 43933kii2b0 200 43933ki02w0 350 0.47 12.0 x 22.0 x 26.0 7.8 44733kip2t0 44733kim2t0 150 44733kii2b0 200 44733ki02w0 300 0.56 45633kip2t0 45633kim2t0 45633kii2b0 45633ki02w0 0.68 12.5 x 22.5 x 26.5 8.0 46833kip2t0 46833kim2t0 150 46833kii2b0 200 46833ki02w0 300 pitch = 27.5 mm 0.4 mm; d t = 0.80 mm 0.08 mm; c-tol. = 10 % 0.22 9.0 x 19.0 x 31.5 5.5 42233kkp2t0 42233kkm2t0 100 42233kki2b0 150 -- 0.27 42733kkp2t0 42733kkm2t0 42733kki2b0 0.33 43333kkp2t0 43333kkm2t0 43333kki2b0 0.39 43933kkp2t0 43933kkm2t0 43933kki2b0 0.47 11.0 x 21.0 x 31.0 7.4 44733kkp2t0 44733kkm2t0 100 44733kki2b0 125 0.56 45633kkp2t0 45633kkm2t0 45633kki2b0 0.68 13.0 x 23.0 x 31.0 9.2 46833kkp2t0 46833kkm2t0 100 46833kki2b0 125 0.82 48233kkp2t0 48233kkm2t0 48233kki2b0 1.0 15.0 x 25.0 x 31.5 12.3 51033kkp2t0 51033kkm2t0 100 51033kki2b0 125 1.2 51233kkp2t0 51233kkm2t0 51233kki2b0 1.5 18.0 x 28.0 x 31.5 16.1 51533kkp2t0 51533kkm2t0 100 51533kki2b0 100 1.8 21.0 x 31.0 x 31.0 20.3 51833kkp2t0 51833kkm2t0 50 51833kki2b0 75 2.2 52233kkp2t0 52233kkm2t0 52233kki2b0 electrical data and ordering information u rac (v) cap. (f) dimensions w x h x l (mm) mass (g) (3) catalo g number f339x1... and packa g in g loose in box taped reel short leads lon g leads l t = 3.5 mm + 1 mm/- 0.5 mm ( ? 10 mm) or 3.5 mm 0.3 mm ( ? 15 mm) l t = 5.0 mm 1.0 mm spq l t = 25.0 mm 2.0 mm spq ? = 500 mm (1)(2) h = 18.5 mm; p 0 = 12.7 mm spq
f339x1 330vac www.vishay.com vishay bccomponents revision: 30-jun-15 6 document number: 28185 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 mounting normal use the capacitors are designed for mounting on printed-circuit boards. the capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. for detailed tape specifications refer to packaging information www.vishay.com/docs?28139 specific method of mounting to withstand vibrat ion and shock in order to withstand vibration and shock tests, it must be ensured that the stand-off pi ps are in good contact with the printed-circuit board: ? for original pitch ? 15 mm the capacitors shall be mechanically fixed by the leads ? for larger pitches the capacitors shall be mounted in the same way and the body clamped space requirements on printed-circuit board the maximum space for length (l max. ), width (w max. ) and height (h max. ) of film capacitors to take in account on the printed circuit board is shown in the drawings. ? for products with pitch ? 15 mm, ? w = ? l = 0.3 mm and ? h = 0.1 mm ? for products with 15 mm < pitch ? 27.5 mm, ? w = ?? l = 0.5 mm and ? h = 0.1 mm eccentricity defined as in drawing. the maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. soldering conditions for general soldering conditions and wave soldering profile we refer to the document sol dering guidelines for film capacitors: www.vishay.com/doc?28171 storage temperature t stg = -25 c to +35 c with rh maximum 75 % without condensation ratings and characteristics reference conditions unless otherwise specified, all electrical values apply to an ambient free temperature of 23 c 1 c, an atmospheric pressure of 86 kpa to 106 kpa and a relative humidity of 50 % 2 %. for reference testing, a conditioning period shall be applied ov er 96 h 4 h by heating the products in a circulating air oven at the rated temperature and a relati ve humidity not exceeding 20 %. approvals safety approvals x1 volta g e value file numbers link en 60384-14 (enec) (= iec 60384-14 ed-3) 330 v ac 1 nf to 2.2 f 40031978 www.vishay.com/doc?28229 ul 60384-14 330 v ac 1 nf to 2.2 f e354331b www.vishay.com/doc?28210 csa-e384-14 330 v ac 1 nf to 2.2 f e354331b www.vishay.com/doc?28210 cqc 330 v ac 1 nf to 2.2 f 12001067597 (l) www.vishay.com/doc?28235 12001067600 (f) www.vishay.com/doc?28236 cb-test certificate 330 v ac 1 nf to 2.2 f de1-48009/m1 www.vishay.com/doc?28218 the enec-approval together with the cb-certificate replace all national marks of the following countries (they have already sig ned the enec-agreement): austria; belgium; czech. republic; denmark; finland; france; germany; greece; hungary; ireland; italy; luxembo urg; netherlands; norway; portugal; slovenian; sp ain; sweden, switzerland and united kingdom. cba116 eccentricity w max. = w + w h max. = h + h i max. = i + i seating plane
f339x1 330vac www.vishay.com vishay bccomponents revision: 30-jun-15 7 document number: 28185 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 characteristics capacitance as a function of ambient temperature (typical curve) impedance as a func tion of frequency (typical curve) max. rms voltage as a function of frequency tangent of loss angle as a function of frequency (typical curve) resonant frequency as a function of capacitance (typical curve) max. rms current as a function of frequency - 6 - 2 - 4 0 2 4 - 50 0 50 100 c/c (%) t amb (c) typical max. min. 0.001 0.01 0.1 1 10 100 1000 10 000 100 000 1 000 000 10 000 000 100 000 000 z () f (hz) 100 nf 470 nf 1 f 2.2 f 1 nf 4.7 nf 10 nf 47 nf 10 100 1000 10 100 1000 10 000 100 000 1 000 000 ac voltage (v) f (hz) t amb 110 c 1 10 100 1000 10 100 1000 10 000 100 000 di ss ipation factor (x 10 -4 ) f (hz) 220 nf c 2.2 f 47 nf c 220 nf 10 nf c 47 nf c 10 nf 0.1 1 10 100 1 10 100 1000 10 000 100 000 f (mhz) c (nf) x1 1 10 100 1000 10 000 1000 10 000 100 000 1 000 000 ac current (ma) f (hz) 2.2 f 1 f 470 nf 1 nf 4.7 nf 10 nf 47 nf 100 nf
f339x1 330vac www.vishay.com vishay bccomponents revision: 30-jun-15 8 document number: 28185 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 insulation resistance as a function of ambient temperature (typical curve) application notes ? for x1 electromagnetic interference suppression in standard across the line applications (50 hz/60 hz) with a maximum mains voltage of 330 v ac ? for series impedance applications we refer to the application note: www.vishay.com/doc?28153 ? for capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. for information depending of the capacitance value an d the number of parallel connections contact: rfi@vishay.com ? these capacitors are not intended for continuous pulse applic ations. for these situations, capacitors of the ac and pulse programs must be used. ? the maximum ambient temperature must not exceed 110 c. ? rated voltage pulse slope: ? if the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 465 v dc and divided by the applied voltage. inspection requirements g eneral notes sub-clause numbers of test s and performance requiremen ts refer to the sectional specification, publication iec 60384-14 ed-3 and specific reference data. group c inspection requirements sub-clause number and test cond itions performance requirements sub- g roup c1a part of sample of sub- g roup c1 4.1 dimensions (detail) as specified in chapters general data of this specification ? initial measurements capacitance tangent of loss angle at 10 khz for c ? 1 f ? tangent of loss angle at 1 khz for c > 1 f ? 4.3 robustness of terminations tensile: load 10 n; 10 s bending: load 5 n; 4 x 90 ? no visible damage 4.4 resistance to soldering heat no pre-drying method: 1a solder bath: 280 c 5 c duration: 10 s 10 4 10 5 10 6 0 20406080100 rc ( s ) t amb (c)
f339x1 330vac www.vishay.com vishay bccomponents revision: 30-jun-15 9 document number: 28185 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 sub- g roup c1a part of sample of sub- g roup c1 4.19 component solvent resistance isopropylalcohol at room temperature method: 2 ? immersion time: 5 min 0.5 min recovery time: min. 1 h, max. 2 h ? 4.4.2 final measurements visual examination no visible damage legible marking ? capacitance | ? c/c| ? 5 % of the value measured initially ? tangent of loss angle increase of tan ? ? 0.008 for ? 1 f ? increase of tan ? ? 0.005 for c > 1 f ? compared to values measured initially ? insulation resistance as specified in section insulation resistance of this specification sub- g roup c1b other part of sample of sub- g roup c1 initial measurements capacitance ? tangent of loss angle at 10 khz for c ? 1 f ? tangent of loss angle at 1 khz for c > 1 f ? 4.20 solvent resistance of the marking isopropyl alcohol at room temperature method: 1 rubbing material: cotton wool immersion time: 5 min 0.5 min ? no visible damage ? legible marking ? 4.6 rapid change of temperature ? a = -55 c ? ? b = +110 c 5 cycles ? duration t = 30 min ? 4.6.1 inspection visual examination no visible damage ? 4.7 vibration mounting: see se ction mounting of this specification procedure b4: frequency range: 10 hz to 55 hz amplitude: 0.75 mm or acceleration 98 m/s2 (whichever is less severe) total duration 6 h 4.7.2 final inspection visual examination ? no visible damage 4.9 shock mounting: see section mounting for more information pulse shape: half sine acceleration: 490 m/s2 duration of pulse: 11 ms ? 4.9.2 final measurements visual examination no visible damage ? capacitance | ? c/c| ? 5 % of the value measured initially ? tangent of loss angle increase of tan ? ? 0.008 for ? 1 f ? increase of tan ? ? 0.005 for c > 1 f ? compared to values measured initially ? insulation resistance as specified in section insulation resistance of this specification group c inspection requirements sub-clause number and test cond itions performance requirements
f339x1 330vac www.vishay.com vishay bccomponents revision: 30-jun-15 10 document number: 28185 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 sub- g roup c1 ? combined sample of specimens of sub- g roups c1a and c1b 4.11 climatic sequence 4.11.1 initial measur ements capacitance measured in 4.4.2 and 4.9.2 tangent of loss angle: measured initially in c1a and c1b ? 4.11.2 dry heat temperature: 110 c ? 4.11.3 damp heat cyclic ? test db ? first cycle ? duration: 16 h 4.11.4 cold temperature: -55 c ? 4.11.5 damp heat cyclic ? test db ? remaining cycles ? duration: 2 h 4.11.6 final measurements visual examination no visible damage legible marking ? capacitance | ? c/c| ? 5 % of the value measured in 4.11.1. ? tangent of loss angle increase of tan ? ? 0.008 for ? 1 f ? increase of tan ? ? 0.005 for c > 1 f ? compared to values measured in 4.11.1 ? voltage proof ? 1900 v dc ; 1 min betwee n terminations ? no permanent breakdown or flash-over insulation resistance ? 50 % of values specified in section insulation resistance of this specification sub- g roup c2 4.12 damp heat steady state 56 days, 40 c, 90 % to 95 % rh, ? no load ? 4.12.1 initial measur ements capacitance ? tangent of loss angle at 1 khz ? 4.12.3 final measurements visual examination no visible damage legible marking ? capacitance ? | ? c/c| ? 5 % of the value measured in 4.12.1. tangent of loss angle increase of tan ? ? 0.008 compared to values measured in 4.12.1. ? voltage proof ? 1900 v dc ; 1 min betwee n terminations ? no permanent breakdown or flash-over insulation resistance ? 50 % of values specified in section insulation resistance of this specification group c inspection requirements sub-clause number and test cond itions performance requirements
f339x1 330vac www.vishay.com vishay bccomponents revision: 30-jun-15 11 document number: 28185 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 sub- g roup c3 4.13.1 initial measur ements capacitance ? tangent of loss angle at 10 khz for c ? 1 f ? tangent of loss angle at 1 khz for c > 1 f ? 4.13 impulse voltage 3 successive impulses, full wave, peak voltage: x1: 4.0 kv for c ? 1 f ? x1: 4.0 kv/ ? c for c > 1 f max. 24 pulses ? no self healing breakdowns or flash-over 4.14 endurance duration: 1000 h 1.25 x u rac at 110 c once in every hour the voltage is increased to 1000 v rms for 0.1 s via resistor of ? 47 ? 5 % ? 4.14.7 final measurements visual examination no visible damage ? legible marking ? capacitance | ? c/c| ? 10 % compared to values measured in 4.13.1. ? tangent of loss angle increase of tan ? ? 0.008 for ? 1 f ? increase of tan ? ? 0.005 for c > 1 f ? compared to values measured in 4.13.1 ? voltage proof 1900 v dc ; 1 min between terminations ? 2160 v ac ; 1 min between terminations and case ? no permanent breakdown or flash-over insulation resistance ? 50 % of values specified in section insulation resistance of this specification sub- g roup c4 4.15 charge and discharge 10 000 cycles charged to 465 v dc ? discharge resistance: ? r min. = 2.2 ? for pitch 37.5 mm and 52.5 mm ? 4.15.1 initial measur ements capacitance ? tangent of loss angle at 10 khz for c ? 1 f ? tangent of loss angle at 1 khz for c > 1 f ? 4.15.3 final measur ements capacitance | ? c/c| ? 10 % compared to values measured in 4.15.1. ? tangent of loss angle increase of tan ? ? 0.008 for ? 1 f ? increase of tan ? ? 0.005 for c > 1 f ? compared to values measured in 4.15.1 ? insulation resistance ? 50 % of values specified in section insulation resistance of this specification group c inspection requirements sub-clause number and test cond itions performance requirements r 465 v dc 1.5 x c (du/dt) --------------------------------------- - =
f339x1 330vac www.vishay.com vishay bccomponents revision: 30-jun-15 12 document number: 28185 for technical questions, contact: rfi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 sub- g roup c5 4.16 radio frequency characte ristic resonance frequency ? 0.9 times the value as specified in section resonant frequency of this specification sub- g roup c6 4.17 passive flammability ? class b bore of gas jet: ? 0.5 mm fuel: butane test duration for actual volume v in mm 3 : v ? 250: 10 s 250 < v ? 500: 20 s 500 < v ? 1750: 30 s v > 1750: 60 s one flame application after removing test flam e from capacitor, the capacitor must not continue to burn for more than 10 s. no burning particle must drop from the sample. sub- g roup c7 4.18 active flammability 20 cycles of 4 kv disc harges on the test capacitor connected to u rac the cheese cloth around the capacitors shall not burn with a flame. no electrical measurements are required. group c inspection requirements sub-clause number and test cond itions performance requirements 45.0 ~ 8 mm 12 mm
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved

▲Up To Search▲

Price & Availability of F339X141033MIP2W0

	To Download F339X141033MIP2W0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .